FIBOCOM L860-GL Hardware User Manual - FCC ID

4m ago
27 Views
0 Downloads
2.65 MB
55 Pages
Transcription

FIBOCOM L860-GLHardware User ManualVersion:1.0.2Date:2018-07-28

CopyrightCopyright 2018 Fibocom Wireless Inc. All rights reserved.Without the prior written permission of the copyright holder, any company or individual is prohibited toexcerpt, copy any part of or the entire document, or distribute the document in any form.Noticechanges or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End usermust follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not beco-located or operating in conjunction with any other antenna or transmitter.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.The document is subject to update from time to time owing to the product version upgrade or other reasons. Unlessotherwise specified, the document only serves as the user guide. All the statements, information and suggestionscontained in the document do not constitute any explicit or implicit guarantee.Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 2 of 55

This device is intended only for OEM integrators under the following conditions:1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and the Max allowedantenna gain is as following table showed:Operating BandAntenna Gain(dBi)WCDMA BAND II8.5WCDMA BAND IV5.5WCDMA BAND V9.07LTE BAND 29LTE BAND 46LTE BAND 59.41LTE BAND 79LTE BAND 128.85LTE BAND 1310.31LTE BAND 1410.38LTE BAND 179.74LTE BAND 259LTE BAND 26(814-824)8.51LTE BAND 26(824-849)8.56LTE BAND 301LTE BAND 389LTE BAND 415.5LTE BAND 6662) The transmitter module may not be co-located with any other transmitter or antenna.As long as 2 conditions above are met, further transmitter test will not be required. However, the OEMintegrator is still responsible for testing their end-product for any additional compliance requirementsrequired with this module installedHost manufacturer is responsible for ensuring that the host continues to be compliant with the Part 15subpart B unintentional radiator requirements after the module is installed and operational.Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 3 of 55

The document is subject to update from time to time owing to the product version upgrade or otherreasons. Unless otherwise specified, the document only serves as the user guide. All the statements,information and suggestions contained in the document do not constitute any explicit or implicit guarantee.IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptopconfigurations or co-location with another transmitter), then the FCC authorization is no longer consideredvalid and the FCC ID can not be used on the final product. In these circumstances, the OEM integratorwill be responsible for re-evaluating the end product (including the transmitter) and obtaining a separateFCC authorization.End Product LabelingThis transmitter module is authorized only for use in device where the antenna may be installed such that20 cm may be maintained between the antenna and users. The final end product must be labeled in avisible area with the following: “Contains FCC ID: ZMOL860GL”. The grantee's FCC ID can be used onlywhen all FCC compliance requirements are met.Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the end user regarding how to installor remove this RF module in the user’s manual of the end product which integrates this module. The enduser manual shall include all required regulatory information/warning as show in this manual.Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 4 of 55

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the followingtwo conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includinginterference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareilne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipmentshould be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement noncontrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source derayonnement et votre corps.\This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.The Innovation, Science and Economic Development Canada certification label of a module shall be clearly visibleat all times when installed in the host device; otherwise, the host device must be labeled to display the Innovation,Science and Economic Development Canada certification number for the module, preceded by the words “Containstransmitter module IC: 21374-L860GLL'étiquette de certification Innovation, Sciences et Développement économique Canada d'un module doit êtreclairement visible en tout temps lorsqu'elle est installée dans le dispositif hôte. sinon, le périphérique hôte doit êtreétiqueté pour afficher le numéro de certification Innovation, Sciences et Développement économique Canada dumodule, précédé des mots "Contient le module émetteur IC: 21374-L860GL.The antenna must be installed such that 20 cm is maintained between the antenna and users, and the Max allowedantenna gain is as following table showedReproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 5 of 55

L'antenne doit être installée de telle sorte que 20 cm soient maintenus entre l'antenne et les utilisateurs,et le gain d'antenne maximal autorisé est indiqué dans le tableau suivant.Operating Band/Bande d'opérationMax allowed Gain/Max autorisé Gain(dBi)WCDMA BAND II8.50WCDMA BAND IV5.50WCDMA BAND V8.76LTE BAND 29.00LTE BAND 46.00LTE BAND 58.25LTE BAND 79.00LTE BAND 128.76LTE BAND 139.09LTE BAND 149.13LTE BAND 178.79LTE BAND 259.00LTE BAND 26(824-849)8.25LTE BAND 301.00LTE BAND 389.00LTE BAND 415.50LTE BAND 666.00Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 6 of 55

TrademarkThe trademark is registered and owned by Fibocom Wireless Inc.Version RecordVersionUpdate dateRemarkV1.0.02018-01-25Draft versionV1.0.12018-03-091. Add UL CA combinations description.2. Modify pin definition and description.1. Modify module timingV1.0.22018-07-192. Change tray package type3. Modify CA Combinations4. And add RF performance parameters and power consumptionV1.0.32018-07-281. Modify B41 HPUE maximum TX power description2. Delete Band21/Band32 Related InformationApplicability TableNo.1Product modelDescriptionL860-GL-01NAReproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 7 of 55

Contents1 Foreword . 111.1 Introduction . 111.2 Reference Standard . 111.3 Related Documents . 112 Overview. 122.1 Introduction . 122.2 Specification . 122.3 CA combinations . 132.4 Application Framework. 152.5 Hardware Block Diagram . 152.6 Antenna Configuration . 163 Application Interface . 173.1 M.2 Interface . 173.1.1 Pin Map . 173.1.2 Pin Definition. 183.2 Power Supply . 223.2.1 Power Supply. 223.2.2 Logic level . 243.2.3 Power Consumption . 243.3 Control Signal . 263.3.1 Module Start-Up. 273.3.1.1 Start-up Circuit . 273.3.1.2 Start-up Timing Sequence. 273.3.2 Module Shutdown . 283.3.3 Module Reset. 283.3.4 PCIe Reset . 303.4 PCIe & USB . 313.4.1 PCIe Interface . 313.4.1.1 PCIe Interface Definition . 313.4.1.2 PCIe Interface Application . 323.4.2 USB Interface . 343.4.2.1 USB Interface Definition . 343.4.2.2 USB2.0 Interface Application . 34Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.FIBOCOM L860-GL Hardware User ManualPage 8 of 55

3.5 USIM Interface